Nitecore Q6 6 Slots Quick Charger

New product

Here comes the new Nitecore Q6 6 Slots Quick Charger! It can charge 6 batteries at the same time with 2A fast charging in per slot

More details

This product is no longer in stock

By buying this product you can collect up to 3 points . Your cart will total 3 points that can be converted into a voucher of 1.50 CHF .


39.00 CHF tax incl.

Add to wishlist

More info

Nitecore Q6 6 Slots Quick Charger

Here comes the new Nitecore Q6 6 Slots Quick Charger! It can charge 6 batteries at the same time with 2A fast charging in per slot. The Q6 Charger is also revolutionary upgrade for IMR batteries and perfectly compatible with 21700 and 20700 batteries. With the optimized IMR charging system, the Q6 can monitor the entire charging process and ensure the end voltage in a safe limits. Plus the indicator light, you can easily know the charging process. And you can also charge your Li-ion batteries when you are driving a car.
Size: 5.41'' x 5.22'' x 1.43'' (137.5mm x 132.5mm x 36.2mm)
Material: PC
Input: DC 12V 2000mAh 24W(MAX)
Output battery: 4.2V±1% / 2A*2 (MAX) / 1A*4 (MAX)/0.65A*6
Compatible with:
Li-ion/IMR: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 22700, 25500, 26500, 26650, 26700
In-car quick 2A charger
Capable of charging 6 batteries simultaneously
Active current distribution
Compatible with Li-ion IMR batteries
Two charging modes (CC/CV)
Automatically detects battery power status and selects the appropriate charging mode and the appropriate voltage
Automatically stops upon charging completion
Overcharging prevention
Reverse polarity prevention and short circuit prevention
Compatible with car adaptor
Designed for optimal heat dissipation
Operating Instructions
Connect to power source: connect one end of the in-car charging cord/adapter into the V2, and the other end into the cigarette lighter or power socket.
Battery installation: The V2 has 2 slots to charge rechargeable batteries of varied sizes. Please make sure to insert batteries of supported types into both slots observing the polarity marks on each slot. The charger will not function if the battery is installed incorrectly. The 3 green LEDs above the slot will blink simultaneously to notify users the error.
Charging tips: During normal charging, the green LEDs will blink to indicate the charging progress; Upon charging completion, 3 LEDs will become steady; If the charger detects any error all 3 LEDs will blink to notify users.
Smart charging: The V2 will choose appropriate charging currents based on its intelligent detection of battery types and capacities. Manual charging current selection is also available. The V2 is compatible with: 3.7V Li-ion rechargeable batteries as well as 1.2V Ni-MH/Ni-Cd rechargeable batteries.

Default Charging Current
The default charging current is 1A. After fully charged, the voltage of Li-ion batteries is 4.2V±1% and the voltage of Ni-MH/Ni-Cd batteries is 1.48V±1%.

Selecting Charging Current
After power on, the V2 will automatically select 1A charging current. User can press the function switch to cycle through “1A-2A-3A”. The blue LEDs on top of the V2 will illuminate to indicate the present charging current:
1. 1 blue LED represents the charging current is 1A;
2. 2 blue LEDs represent the charging current is 2A;
3. 3 blue LEDs represent the charging current is 3A.

Li-ion Battery Recovery
Upon insertion of a 0V IMR battery, all 3 green LEDs over the slot will blink together to indicate that the battery is non-rechargeable. In this situation, press and hold the function switch to enter recovery mode. One of the LEDs will go on to notify users. It is recommended to discard the battery if it fails to be recovered after several attempts.
Failing to do so may result in fire and explosion.

Overtime Charging Protection
The V2 will calculate the charging time of the battery in each slot separately. If the accumulated charging time exceeds ten hours, it will automatically terminate charging and all the green LEDs will go on. This is to prevent possible overheat or even explosion due to battery quality issue.

Anti-short Circuiting and Reverse Polarity Protection
If a battery is inserted with its polarity reversed or is short-circuited, 3 LEDs above that slot will blink to notify users.

PID (Proportion Integration Differentiation) System
The PID system will automatically regulate the charging temperature within the safety limit when charging in a large current.

USB Output
The V2 supports USB output during charging. The maximum output current is 2.1A.

Reviews

Write a review

Customers who bought this product also bought:

Recommended Products:

11 other products in the same category: